Duracell POWER 1000, User Manual

Page: 5 / 9

USING YOUR POWER 1000
STORAGE AND MAINTENANCE
1. Short press any power button to turn the Unit on. (indicated here by the arrow icon )
The LCD screen will light up, and the battery level indicator will display. From there, you need to
turn the output port(s) by pressing the button again. The Unit will beep when the ports turn ON.
2. The 100 W USB-C (in/out) has an auto detect function, and the power turns ON immediately by
connecting the device. For other ports, short press the power button of the ports you wish to use
(DC, USB, or AC).
3. Ports icon will appear on the LCD screen, indicating that the ports are on and ready to use.
4. Connect your device to the desired port/outlet.
5. AC outlets can only charge/power devices rated less than 1000 Watts.
Once this limit is exceeded, the Unit will shut OFF automatically.
6. The AC port output will turn OFF automatically after 2 hours if no load is detected.
7. The DC port or car charger port will turn OFF automatically in 8 hours if no load is detected.
8. LCD screen will automatically dim and shut down after 60 seconds when all ports are
OFF or not in use.
9. To turn the LED light press the button above it. Click again to cycle through the different
modes (Low – High – SOS – OFF).
10. If the Unit won’t be used for a long period of time, it should be recharged every 3-6 months
and keep the power above 80%. Please keep it in a cool and dry place.
1. Please keep the Unit in a cool and well-ventilated environment, away from any
source of water, heat or flammable gases.
2. For long-term storage, please recharge the Unit every 3-6 months to make
sure it’s always above 80%.
3. To prolong the life of the Unit, keep the Unit above 80% state of charge.
100
%
Watts
OOO
DC AC USB
DC USB
AC