Order Entry: 800-247-4081 • Answer Line: 877-257-1781
5
Model DM30
1/2 HP Motor
200 rpm
Belt Drive
21” Reel
5/8” x 100’ Cable
PCFR
2-Year Warranty
Telescoping Handle
Continuous Weld
Frame Construction
USES:
2” to 6” lines,
Residential,
Roof Vents ,
Floor Drains,
Light Commercial
Model DM30
DM30 with 21PRS, 21” Enclosed Polyethylene Reel
DM30 with D1J1, 21” Open Metal Spoke Reel
Cable Care Instructions
Take care of your cable for optimum performance. The
recommended care procedure is as follows:
• Break in a new cable. To relieve the stress on new cable that
has been coiled since its manufacture, put it in a clean line and
run it for 10 minutes.
• Oil the cable once a week.
• Rinse the cable immediately after each use with the hottest
water available. This is especially important if the cable was in
acid or alkali during use.
• When one end of the cable begins to show wear, rewind and
use the opposite end. (Tip: order the same kind of end fittings
on both ends of the cable.)
• If the cable kinks, cut out the kink and splice the cable ends
together.
Reel Attachment
The reel you select is set in place and slipped onto the reel shaft.
Drive lugs are mounted on the drive plate and slip through the
opening in the back of the reel. The reel is held in place by the
revolving arm.
