Order Entry: 800-247-4081 • Answer Line: 877-257-1781
2
Duracable
®
Machine Manual
Model DM30
2
Warranty, Parts and Service
3
Safety Labels
4-7
DM30 Information and Specifications
8-12
DM30 Machine Schematics
13-14
DM30 Electrical Schematics and Safety Information
15
DM30 Wheel Mounting Instructions
16-20
PCFR Information, Specifications, and Schematics
21
Blade Kit, Tail Pieces, and Leaders
22
How to Splice DuraFlex
®
Cable and How to Bond End Fittings
WARRANTY
Duracable Manufacturing Company warrants the Model DM30 machine to be free from defects in material and workmanship for a period of two
years from the date of purchase. Warranty service can be obtained by contacting Duracable Manufacturing Company at the address listed below.
If a defect is covered by warranty, Duracable Manufacturing Company will repair or replace the defective machine or component without charge
for labor or materials (freight is not included).
Warranty of the machine is limited to the original purchaser. Duracable Manufacturing Company assumes no responsibility for damage or
injury from accident, neglect, abuse, misuse or from damage due to repair or alterations by others. This warranty does not cover damage to the
machine from use of parts other than genuine Duracable brand parts.
Duracable Manufacturing Company’s sole obligation and the original purchaser’s sole remedy under this warranty shall be for repair or replacement
as described above. All other warranties, expressed or implied, including but not limited to, implied warranties of merchantability and fitness
for a particular purpose, are disclaimed. In no event shall Duracable Manufacturing Company be liable for any incidental or consequential
damages.
PARTS AND SERVICE INSTRUCTIONS
Parts can be purchased from Duracable Manufacturing Company. Service work is also available. Service is performed by trained factory personnel.
Machines sent to the factory for evaluation and repair can be estimated and quoted prior to service work. When sending a machine, be sure to
include the return address and include instructions on how the repair should be handled. Instructions can either be included with the machine,
explained to your account manager over the phone (800-247-4081), or faxed (515-223-4220).
IMPORTANT
Keep this manual in a safe, convenient place for future reference. Important information about this machine, its diagrams and warranty
information are included in this manual.
Serial
Number:
Date
of
Purchase:
Duracable Manufacturing Company
300 Ashworth Road, West Des Moines, IA 50265
Table of Contents
