E - 18
PLAYING A DISC
This owner’s manual explains the basic instructions of this unit. Some DVD
discs are produced in a manner that allows specific or limited operation
during playback. Such as, the unit may not respond to all operating commands.
This is not a defect in the unit. Refer to the instruction notes of discs.
“
” may appear on the screen during operation. A “
” means that the
desired operation is not permitted by the unit or disc.
Basic playback
Pausing playback (still mode)
Press the
II
PAUSE
button. To resume normal playback, press the
PLAY
button.
Each time you press the
II PAUSE
button, the picture advances one frame.
Stopping playback
Press the
STOP
button at the location where you want to interrupt playback. To
resume playback at the position where the disc was stopped, press the
PLAY
button.
If you press the
STOP
button twice, the unit’s memory will be cleared and
pressing the
PLAY
button will reset the disc to the beginning.
To skip to a different track
•
Press the
PREV
button repeatedly to skip to the start of the current or
previous track.
•
Press the
NEXT
button to skip to the next track.
•
For audio CD disc, use the number buttons (remote control only) to jump straight
to that track number.
DVD
CD
Playing a Disc
1.
Slide the
POWER
ON / OFF
switch on the left side of unit to ON.
2.
Slide the
AV IN / DVD
switch on the right side of unit to select DVD mode.
3.
Push the
OPEN
switch to open the disc door.
4.
Hold the disc by its sides and carefully place it onto the central spindle in the disc
compartment, with the label side facing up; press the disc down until you hear a
“click”.
5.
Push the door to close.
It takes a short while for your unit to load the disc. After loading, the unit will
automatically start playing most DVDs.
6.
If the DVD does not start automatically, press the
PLAY
button.
