IB-PDV705-WM-E-010506
POWER SUPPLY
B. Using the rechargeable battery
The rechargeable battery pack is suitable for portable use and when it is convenient for you to
enjoy the unique functions of the unit outdoors.
Remember to charge the battery fully before initial use.
You can power this portable DVD player by connecting the AC adaptor or by the rechargeable
battery (both included).
A. Using the AC adaptor
This player is supplied with an AC adapter for
powering the unit and charging the battery.
Insert the AC adaptor plug to the DC IN jack on
the portable DVD player and connect the
adaptor to a wall outlet.
To charge the battery
1. Insert the adaptor
’
s plug into the DC IN jack on the DVD player and connect the
adaptor to a wall outlet. After 5 seconds, the battery LED indicator will turn on.
2. The battery LED indicator will flash when charging the battery and be steadily on when the
battery is fully charged.
3. Charging time is about 5 hours. A fully charged battery delivers about 2.5 hours of use.
Attaching the Battery
Refer to the following steps for attaching the battery:
1. Make sure the player is off and the AC adapter is
disconnected.
2. Place the DVD player on a soft and smooth surface with
the bottom of the unit facing up.
3. With one hand on the DVD player to prevent it from
moving, take the battery and align the plastic tabs on the
battery with slots on the player, and slide it forward to lock,
The battery will click into place.
Detaching the Battery
1. Make sure the player is off and the AC adapter is
disconnected.
2. Push the tab on the battery down.
3. Slide and lift the battery out.
SLIDE
2
3
7
NOTE:
When inserting the battery while the set is AC powered, the LED turn on is delayed by
several seconds. This is because the battery charging circuit needs to reset and
detect the battery status.
slot
slot
tab
IB-PDV705-WM-E-010506.pmd
4/3/2006, 9:24 AM
8
