12
Connections (Continued)
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your existing equipment.
RF coaxial connection
Connect the ANTENNA/CABLE OUT jack on the
DVD+Hi-Fi VCR to the antenna in jack on the TV using
the 75-ohm Coaxial Cable supplied
(R)
.
ote
If you use this connection, tune the TV to the DVD+Hi-
Fi VCR’s RF output channel (CH 3 or 4).
How to set the DVD+Hi-Fi VCR’s RF output channel
1.
While the DVD+Hi-Fi VCR is turned off, press and hold
TUNING (
v
/
V
) on the front panel for about five
seconds.
The unit will turn itself on and “RF-03” or “RF-04” appears in
the display window.
2.
Use TUNING (
v
/
V
) on the front panel to change the
RF output channel (CH 03 or CH 04).
3.
Turn the DVD+Hi-Fi VCR off and then on.
4.
Press the TV CH to 3 or 4 depending on the RF
output channel you had selected.
Now you can watch the DVD+Hi-Fi VCR playback on
CH3 or CH4 of your TV.
Video connection
Connect the MONITOR OUT jack on the DVD+Hi-Fi
VCR to the video in jack on the TV using the video
cable supplied
(V)
.
ote
If you use this connection, set the TV’s source selector
to VIDEO.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD+Hi-Fi VCR
to the S-Video in jack on the TV using the optional S-
Video cable
(S)
.
Accessory Audio/Video (A/V) Connections to
DVD+Hi-Fi VCR
Connect the VIDEO 1 or VIDEO 2 jacks on the
DVD+Hi-Fi VCR to the audio/video out jacks on your
accessory component, using the optional audio/video
cables.
L
R
AUDIO INPUT
VIDEO
INPUT
ANTENNA
INPUT
V
S
R
Rear of TV
ANTENNA
AM
GND
FM
S-VIDEO OUT
VIDEO
MONITOR
OUT
VIDEO
AUDIO
IN
OUT
ANTENNA/CABLE
1
L
R
SPEAKERS
FRONT
(R 4 )
(R 4 )
REAR
CENTER
( 4 )
REAR
(L 4 )
FRONT
(L 4 )
SUB
WOOFER
( 8 )
Rear of DVD+Hi-Fi VCR
S-VIDEO
INPUT
L
R
VIDEO
OUTPUT
AUDIO
OUTPUT
Accessory Device Jack Panel
DVD+Hi-Fi VCR
Front of DVD+Hi-Fi VCR
OR
S-VIDEO OUT
VIDEO
MONITOR
OUT
VIDEO
AUDIO
IN
OUT
ANTENNA/CABLE
1
L
R
NT
)
SUB
WOOFER
( 8 )
