background image

IB-HT377-WM-E-050405

CAUTION

FCC  Regulations  state  that  unauthorized  changes  or  modifications  to  this  equipment  may
void  the  user

s  authority  to  operate  it.

FCC NOTE

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses  and  can radiate  radio  frequency  energy and,  if  not  installed  and used  in  accordance
with  the  instructions,  may  cause  harmful  interference  to  radio  communications.  However,
there  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this
equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which  can  be
determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct
the  interference  by  one  or  more  of  the  following  measures.
- Reorient  or  relocate  the  receiving  antenna.
- Increase  the  separation  between  the  equipment  and  receiver.
- Connect this equipment into an outlet on a circuit different from that to which the receiver

is  connected.

- Consult  the  dealer  or  an  experienced  radio/TV  technician  for  help.

SAFETY INSTRUCTIONS

Please read important information displayed on the rating plate located on the bottom enclosure
before  connecting to  AC Mains  or any  operation.

2

PRECAUTIONS

ON SAFETY

Should  any  solid  object  or  liquid  fall  into  the  Home  Theater  System,  unplug  the  player,
and  have  it  checked  by  qualified  personnel  before  operating  it  any  further.

ON PLACEMENT OF YOUR HOME THEATER SYSTEM

Do not leave the Home Theater in a location near a heat source, or in a place subject to
direct  sunlight,  excessively  dusty  rooms  or  r ooms   with  v ery  high  humidity.

Do  not  place  the  Home  Theater  system  on an  inclined  or  unstable  place.

Do  not  place  anything  within  1  inch  of  the  sides  or  2  inches  from  the  back  of  the
cabinet.  The  heat  sink  fins  must  not  be  covered  for  the  set  to  operate  properly  and
prolong  the  life  of  its  components.

IB-HT377-WM-E-050405.pmd

6/2/2005, 2:15 PM

3

Summary of Contents for HT-377




















Reviews: