IB-CDR1907-WM-E-042607
NOTE:
If the plug of the AC power cord does
not match your outlet, do not force it.
Reverse it and try again. This plug is
polarized and only fits one way into
the wall outlet.
NOTE:
To change AM to PM time, advance the
clock time 12 hours. PM lamp LED will be
steadily on. Remember PM time is after
midday, AM time is before midday (no PM
LED on).
1
Connect the AC power cord into a live wall outlet. Clock display will show
“
12:00
”
flashing.
To use battery backup
Install a 9V battery for clock backup, so
that if your home power is momentarily off
due to a power outage, you will not have to
set up the time & alarm settings. (This is
optional, your set will work ok without the
battery. It is only needed if you have
occasional power outages in your area,
and don
’
t care to reset the clock times.)
1. Setting the Clock
BATTERY COMPARTMENT
(at the bottom of the set)
PLAY
PAUSE
PROGRAM
REPEAT
RANDOM
SLEEP
ALARM 1
ALARM 2
PM
PM lamp indicator
2
To set the correct hour and minute time, press and hold the CLOCK SET button, then
press the HOUR or MINUTE button until the desired time is displayed, then release
both buttons.
3
To reduce the brightness of the display, press the DIMMER button,
press again to restore.
DIMMER
AND
HOUR
MINUTE
Example: 10:00 AM
OR
CLOCK
SET
3
IB-CDR1907-WM-E-042607.pmd
4/27/2007, 12:13 PM
4
