IB-CD96(CDM32A-60F8)-WM-E-030803
SAFETY PRECAUTIONS
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer
servicing to qualified service personnel only.
Do not insert pins or coins, clips, or any objects inside the set.
This set is equipped with a safety device which automatically turns the laser beam off
when the CD DOOR is opened.
Do not drop the set or subject it to strong shocks. Doing so could result in damage.
Do not place the set in locations where the temperature is high, or in humid or dusty
locations, or locations with long heavy vibrations, or tilted surfaces.
The sets cabinet may warp or the set may be damaged if it is placed in direct sunlight,
near heaters (where the temperature is 140
0
F/60
0
C or higher) or in cars with the
windows closed. In the summer, the temperature may get as high as 212
0
F/100
0
C or
more.
Use the set within a temperature range of 41
0
F/5
0
C to 95
0
F/35
0
C.
Use ONLY the optional DC 4.5V AC ADAPTOR with plus center polarity ,
others may damage your set. Disconnect the ADAPTOR from the wall outlet when the
set is not to be used for an extended period of time (3 days or more).
When cleaning your set, use a soft dry cloth. Do not use solvents or commercially
available cleaners, as they may damage or discolor the finish.
Do not wear headphones while operating a motor vehicle. This could create a traffic
hazard and is illegal in many areas. Do not use this set when bicycling or running.
The headphones supplied with your set provide superb stereo listening while allowing
you to hear some outside sounds when listening at normally low volume levels. Listening
at extremely high volume levels minimizes the intrusion of outside noise/sounds. In the
interest of safety, it is strongly advised against the use while engaging in activities
where the exclusion of external sounds (whistles, horns, sirens, traffic, etc.) could be
hazardous. Also loud volume can hurt your ears. Discontinue use or lower the volume.
If you notice that the sound has become weak or distorted or if tracks do not change,
this is an indication that your batteries are weak. Replace both batteries at the same
time (see Using with Batteries).
Your CD-96 is identified by a serial number located on the bottom of the set. Record
this number in the space provided below.
CONDENSATION
If cold water is poured into a glass, water droplets form on the outside of the glass. This is
called condensation. Condensation may occur on internal operating parts of the lens.
Condensation occurs:
When the set is brought from the cold outdoors into a warm room, or if it is in a cold
room to a room which is heated, or in the summer, if the set is moved from an air-
conditioned room or car to a hot or humid location.
Should condensation occur, the set may not operate properly. Open the CD DOOR
and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding
temperature) before using the set.
This manual contains detailed information on its safety and use. Please read it carefully
so that you may take full advantage of its many features, and ensure a safe reliable
operation. Keep this manual for future reference.
Date Purchased:
Model CD-96
Serial No.
15
IB-CD96(CDM32A-60F8)-WM-E-022203.p65
11-3-03, 16:02
16
