Durabook VD-T02 User Manual Download Page 5

Page: 5 / 5

Cradle VD-T02

Remove the R11 Tablet PC from the docking cradle.

Using the Cable Standoff and Cable Clamp

⚫

Connect the power cable to the DC IN jack and rotate the plug (L-type) into
the cable standoff (

) to secure it in place.

⚫

For other cables connection,

route the cable(s) through the cable clamp (

Twinhead International Corp.

11F, No.550, Ruiguang Rd., Neihu, Taipei 11492, Taiwan, R.O.C.

Summary of Contents for VD-T02

Page 2: ...ging To unlock the latch do the following 1 Insert the latch bar key 2 Turn it clockwise until a click is heard indicating the latch bar is released 3 Remove the key from the key slot No Item 1 Latch 2 Alignment port x2 3 Latch bar with key slot 4 Cable standoff No Item 1 Mounting holes for VESA mount 2 Cable clamp ...

Page 3: ... into the alignment ports on the docking cradle 2 Secure the R11 Tablet PC by pulling the latch forward until a click is heard and the latch is fully engaged 3 Fully push the latch bar into position to ensure the latch is tightly secured NOTE If the latch bar cannot be pushed adjust the latch position and repeat step 3 ...

Page 4: ...blet PC 1 Insert the latch bar key into the latch bar and turn clockwise until a click is heard Refer to the Unlock the Latch section 2 While supporting the R11 Tablet PC with one hand push the latch backward until it fully disengages ...

Page 5: ... and Cable Clamp Connect the power cable to the DC IN jack and rotate the plug L type into the cable standoff A to secure it in place For other cables connection route the cable s through the cable clamp B Twinhead International Corp 11F No 550 Ruiguang Rd Neihu Taipei 11492 Taiwan R O C A B ...