Durabook VD-T02 User Manual Download Page 3

Page: 3 / 5

Cradle VD-T02

Docking the Tablet PC

With screen side facing out and docking connector down, insert the R11 Tablet
PC into the alignment ports on the docking cradle.

Secure the R11 Tablet PC by pulling the latch forward until a “click” is heard

and the latch is fully engaged.

Fully push the latch bar into position to ensure the latch is tightly secured.

NOTE:

If the latch bar cannot be pushed, adjust the latch position and repeat

step 3.

Summary of Contents for VD-T02

Page 2: ...ging To unlock the latch do the following 1 Insert the latch bar key 2 Turn it clockwise until a click is heard indicating the latch bar is released 3 Remove the key from the key slot No Item 1 Latch 2 Alignment port x2 3 Latch bar with key slot 4 Cable standoff No Item 1 Mounting holes for VESA mount 2 Cable clamp ...

Page 3: ... into the alignment ports on the docking cradle 2 Secure the R11 Tablet PC by pulling the latch forward until a click is heard and the latch is fully engaged 3 Fully push the latch bar into position to ensure the latch is tightly secured NOTE If the latch bar cannot be pushed adjust the latch position and repeat step 3 ...

Page 4: ...blet PC 1 Insert the latch bar key into the latch bar and turn clockwise until a click is heard Refer to the Unlock the Latch section 2 While supporting the R11 Tablet PC with one hand push the latch backward until it fully disengages ...

Page 5: ... and Cable Clamp Connect the power cable to the DC IN jack and rotate the plug L type into the cable standoff A to secure it in place For other cables connection route the cable s through the cable clamp B Twinhead International Corp 11F No 550 Ruiguang Rd Neihu Taipei 11492 Taiwan R O C A B ...