3
Providence Arbor
Starting at bottom of 84" left post (part 1) insert one 22" top/bottom cross rail (part 3) and eight 22" center
cross rails (part 4) into holes. DO NOT insert remaining top/bottom cross rail into top hole at this time.
Insert free ends of cross rails into 84" right post (part 2). Slide two 59½" vertical slats (part 5) through each
center cross rail and into bottom cross rail. Separate top of posts just enough to insert remaining 22"
top/bottom cross rail (part 3) into top hole of each post, inserting free end of vertical slats into top cross
rail. Using three 1¼" screws per post, fasten together arbor side. Be sure all parts are fully inserted into
posts before securing.
REPEAT using remaining posts and cross rails to make second arbor panel.
