DURA-BILT In-Swinging Door Assembly Instructions Download Page 1

Page: 1 / 4

Dura-Bilt Products, Inc. P.O. Box 188 Wellsburg, N.Y. 14894

Dealer Service 570-596-2000 E-Mail [email protected]

DURA-BILT RESERVES THE RIGHT TO CHANGE DESIGN AND/OR SPECIFICATIONS WITHOUT NOTICE.

Check the material received.

Match your shipment with the Bill of Materials.

If there is a shortage or wrong material,

call Dealer Service immediately.

Safety is important!

Wear Safety Glasses and Work Gloves.

Follow all safety practices while assembling

and installing this product.

Read the instructions before starting the job. They explain the steps required

to produce a fi nished product that will meet factory specifi cations.

All references to “Left” and “Right” are while facing the home.

Assembly Instructions

for the In-Swinging Door

Deluxe 3-Season Sunroom, Standard 3-Season Room, Deluxe Screen Room and

Full Screen Room Installation of the Handle, Latch, Deadbolt & Closer

ISDI-08

Summary of Contents for In-Swinging Door

Page 1: ...iately Safety is important Wear Safety Glasses and Work Gloves Follow all safety practices while assembling and installing this product Read the instructions before starting the job They explain the s...

Page 2: ...3 With the Hold Open Washer on the Shaft slide the Closer Bracket Connecting Pin through the Closer Bracket and through the shaft of the Door Closer then using a pair of pliers squeeze the Push Retain...

Page 3: ...Line up the Inside Handle with the Outside Handle use two 2 6 32 x 1 3 8 pan head self tapping screws to join the whole assembly 3 Center the Aluminum Shim under the Striker and line up with the Insi...

Page 4: ...p 3 Insert outside deadbolt assembly with spindle from outside of door Step 4 Install dead bolt on inside of door with bolt facing jamb install two 2 6 32 x 1 3 8 pan head self tapping screws Step 5 E...