48
‰
1
Is the paper feed pressure too
high?
(5) Double feed occurs frequently.
•
Lower the paper feed pressure
gradually until the optimum
pressure is obtained.
13. TROUBLESHOOTING GUIDE
Problem
Check
Correct
‰
2
Is the paper separator dirty?
•
Clean with neutral detergent or
alcohol.
•
Loosen the paper properly and
load on the paper feed table.
‰
3
Are the sheets of paper stuck to
each other and cannot be
separated?
‰
4
Is paper outside the specified
sizes used?
•
Do not use such a kind of paper
as they will cause problems.
5
Has a problem occurred inside
the unit?
•
Contact your serviceman.
(6) Paper slips frequently.
1
Is the paper feed pressure too
low?
•
Raise the separator pressure
gradually until the optimum
pressure is obtained.
2
Is the paper feed ring dirty?
•
Clean with neutral detergent or
alcohol.
3
Are the sheets of paper sticking
to each other and cannot be
separated.
•
Loosen the paper properly and
load on the paper feed table.
4
Is paper outside the specified
sizes used?
•
Do not use such paper as they
will cause problems.
5
Has a problem occurred inside
the unit?
•
Contact your serviceman.
1
Is the rubber roll dirty?
•
Clean with neutral detergent or
alcohol.
(7) Paper jams frequently.
•
Check inside the unit and
remove any paper shreds.
2
Are paper shreds stuck inside
the paper conveyance
passage?
3
The stacker roller position is not
correct.
•
Re-set the position of the
stacker roller.
4
Is the paper curled?
•
Straighten the curl before use.
5
Is the guide plate unit left
attached to the paper ejection
plate?
6
Due to static electricity.
•
Use an anti-static electricity
spray available on the market.
•
Remove the guide plate unit.
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
‰
