39
6
Adjust the rough adjustment knob of
first folding plate to the mark which
has a value half of this length.
• Adjust the rough adjustment knob of the second
folding plate to “End”.
7
To prevent folding slippage in the
horizontal direction and misfeeding,
press the folded edge of the paper
with your hand firmly.
8
Set the single fold paper on the paper
feed table.
Place the paper with the folded edge
to the back of the unit as shown in the
figure.
The amount of paper that can be folded is
approximately 2/3 (approx. 1-1/2 inch) of the
height of the guide at the folded side.
9
Open the top cover and move the
paper feed ring at the far end to the
folded edge of the paper.
• Loosen the set screw and move the paper feed ring.
• After moving the paper feed ring, tighten the set
screw properly.
Rough adjustment knob
Rough adjustment knob
Second folding plate
First folding plate
Paper
Set knob
Paper feed ring (For moving)
10. CROSS FOLDING (Optional-Cross Folding kit is required)
