Duplo DC-445 Instruction Manual Download Page 38 | Manualshive

Page: 38 / 48

Duplo DC-445 Instruction Manual Download Page 38

35

Message Status

and

Countermeasures

Status: Paper jam in the crease area.
Countermeasure: Remove the jammed documents from the

crease area and press the STOP key.

Status: Paper jam in the paper exit area.
Countermeasure: Remove the jammed documents from the

stacker

tray and press the STOP key.

Status: Check paper jam in the crease area.
Countermeasure: Remove the jammed documents from the

crease area and press the STOP key.

Turn off the power and then turn on the power again after a few
seconds. Contact service person if the error remains.

Status: Check paper jam in the option area when the power is

turned on.

Countermeasure: Remove the jammed documents from the

option area, and press the STOP key.

Status: Check paper jam in the crease area when the power is

turned on.

Countermeasure: Remove the jammed documents from the

crease area, and press the STOP key.

Status: Check paper jam in the paper exit area when the power

is turned on.

Countermeasure: Remove the jammed documents from the

stacker

tray and press the STOP key.

«
...
36
37
38
39
40
...
»

Summary of Contents for DC-445

















































Reviews:

No comments