24
5.5 Timer programming
Please note:
Timer control is an alternative programming process to temperature 2 for slot 2.
5.5.1 Setting the timer control mode
Time
flashes .
To choose between the three control options press
,
(automatic mode) will flash in the display
If you want to operate slot 2 with programmed turn-on and turn-off times, press
when
flashes . Proceed
enering your settings as in item 5 .5 .2 of this instruction .
If you want to operate slot 2 via interval control, use the
▲
button to select
and confirm by pressing the
button . Proceed making your settings with item 5 .5 .3 of this instruction .
If you want to have slot 2 permanently activated, use the
▼
to select
and acknowledge with
. When
Time
flashes again, to finish programming, press and hold
for 3 seconds again until the display returns to the
operating mode .
