30
EN
9.2 Logging on DuoFern Devices
1.
Switch the desired DuoFern device to the registering mode (please
refer to the relevant instruction manual).
2.
1 sec. Activate the registering mode of the
DuoFern Multiple Wall Controller.
Simultaneously press and hold the
buttons 1 and 2 for 1 second.
LEDs 1 and 2 will flash white.
120 sec.
The registering mode remains active for
approx. 120 seconds.
3.
After successfully logging on, the LEDs of the remaining available
buttons will light up white.
4.
Tap on the desired available button group to allocate the new
DuoFern device to this button group.
5.
Log-on the next DuoFern device.
i
Pay attention to the LEDs
All LEDs will light up red, one after the other, if the log-on was
unsuccessful. For example, if...
◆
8 DuoFern devices are already logged on to a button group.
◆
an unsuitable device is logged on.
Morning Mood
Wellness
Roller shutters
