background image

Light indication 
Wireless speaker base light indication 

Power on: blinking blue light 

Single speaker pairing: blue light 

Dual speaker (TWS mode) pairing: blue light 

Pairing between speaker: white light 

Incoming call: fast paced alternating blue and white light 

Connected call: slow paced alternating blue and white light 

Mute incoming call: blinking white light 

Battery status display   

Fully charged: three continuous white light 

75% charged: two continuous white light 

40% charged: one continuous white light 

>10% charged: one blinking white light (there will be four continuous sound 

indications at an interval of 30s) 

Battery charging display 

Orange light indication will appear during charging. When the battery is fully charged, 

three white lights will be shown. If the battery is charged more than 3.5 hours after it 

is fully charged, all three white light will be turn off, and the charging is terminated. It 

is advised to disconnect USB charging cable to avoid potential hazardous. 

Product Charging 

Please use the provided micro USB charging cable, 5V/1A charger 

Product specification 

Product function: wireless speaker, built-in speaker, can be paired with mobile phone 

for phone conference   

Wireless reception distance: approx. 10 meter (with no interference) 

Music format: SBC, aptX, aptX-LL, ACC decoder 

Distortion rate: <3% 

Signal to noise ratio: >70dB 

Sound pressure level: 87dB (0.5m) 

Frequency range: 120Hz 

– 20kHz 

Charging voltage: 5V/1A 

Charge time: approx. 2 hours 

Play time: approx. 6-10 hours (depending on usage) 

Rated power: built-in lithium battery 3.7V 1400mA/h 

RF power: 9.683mW 

Carrier frequency: 2402-2480MHz ISM Band Total 79 Channel 

Modulation mode: GFSK,π/4-DQPSK, 8DPSK 

Antenna type: FPC Antenna with -2.23 dBi 

Summary of Contents for SSP3224-40







Reviews: