background image

 

4. 

Product appearance 

 

       

           

 

 

5. 

  (Product user manual) 

Multi-function button definition:   

                              Short press: press time 0.2s 

                              Long press: press time 1s 

                              Short press twice: press time 0.2s, press interval 0.4s 

                              Very long press: press time 3-4s 

Power up: 

Very long press 3-4s, power up sound indication (increasing volume) and 

blinking of blue light 

To use TWS mode, both speakers need to be turned on 

Wireless pairing (TWS mode): 

                                    After powering up, L and R each short press twice. A continuous white 

light will be indicated. 

                                    After both speakers are paired, long press on either of the speakers to 

pair it with device. 

                                    After TWS pairing is completed, Twin mode pairing will be prioritized         

thereafter 

Wireless pairing (single speaker mode): 

                                    Long press when the speaker has turned on. A blue light indication 

appears, and pairing with device can be performed. A white light 

indication will appear after pairing with device is completed. 

Shut down: 

Very long press 3-4s, power off sound indication (decreasing volume). 

In  TWS  mode,  if  one  of  the  pairs  is  shutdown,  the  other  pair  will 

 

 

 

 

Summary of Contents for SSP3224-40







Reviews: