7
Warning
CHEMICAL/EXPLOSION
HAZARD
Read ALL instructions be-
fore charging or using bat-
tery. Failure to follow ALL
instructions may result in
fire, severe burns, or re-
lease of toxic materials.
Battery and Charging System
Charging Instructions
1.
Remove wall mount unit with the blue label from
the tool case and plug into a 120V AC outlet. Set
the black charger on a stable surface and insert wall
mount unit’s plug into plug receptacle on the back
of the charger (see picture). A green light indicates
power is on and charger circuit is ready.
2.
Remove the battery from tool or case and insert
terminals down into charger. The red light will come
on indicating that the battery is charging and the
green light will go out.
If battery is completely discharged, the red light and
the green light may flash back and forth.
This safety feature slowly recharges the battery
until it is ready to accept the full charging current.
If the red and green lights continue to flash after
5 minutes, replace the battery.
3.
After charging is complete, the red light will go out
and the green light will come on, indicating that the
battery is fully charged. The charger will keep the
battery at full charge until it is removed.
4.
Unplug the wall mount unit from the charger and
remove the wall mount unit from the 120V AC outlet.
CHARGING TIMES:
First charge (new battery)
2 hours
Discharged Battery
5 minutes to 2 hours
CHARGING DON'TS:
1.
Do not charge battery outdoors or in temperatures
below 40°F (5°C).
2.
Do not allow metal objects to come in contact with
battery terminals.
3.
Do not puncture or attempt to open battery case or
cells.
4.
Do not store battery where it will be subjected to
temperatures above 120°F (49°C).
5.
Do not incinerate battery.
6.
Do not use a defective battery charger, one that
over-heats and/or smokes when plugged in.
7.
Do not immerse the battery in water.
Charging System Accessories:
Battery Charger Kit - Part No. 902327
Wall Mount Transformer* - Part No. 902302
Battery Charger Base* - Part No. 902301
Automotive Adapter* - Part No. 902333
NOTE
Battery and Charging System
The Duo-Fast
®
Cordless tools come with a recharge-
able battery and its own charging system. This
charging system is the only one that will work with
Duo-Fast
®
batteries. The first step in preparing a
new tool for operation is to fully charge the battery.
New batteries are shipped discharged and must be
charged prior to first use.
Batteries will take 5 minutes to 2 hours (time will
be dependant on the amount of discharge of the
battery) to recharge.
Important Charging Notes
Battery Disposal:
TheDuo-Fast
®
batteries contain cadmium and must be
recycled or disposed of properly. It is illegal in some
areas to place a nickel-cadmium battery into the trash
or solid waste stream. You may contact your local
recycling center for information on where to return the
spent battery or call 1-800-822-8837 for information on
Ni-Cd battery recycling in your area.
Duo-Fast
®
Battery - Part No. 902336
