L.312.C.M
Mercedes-Benz Sprinter 200/300
Volkswagen Crafter 28-35
8
DUNLOP and the Flying D Device are trademarks of Dunlop International Group and are used under license by DSC Nederland B.V.
www.dunlopsystems.nl
5. INSTRUCTIONS FOR INSTALLATION
Preparation and Precaution
Before beginning installation, ensure that you have sufficient
clearance between the axle and the chassis. Use a jack if
necessary. Install at one side of the vehicle at a time.
Pay attention to your safety at all times during installation -
always use axle stands to support the vehicle!
5.1 Bump Stop Removal and fitting of Upper Bracket Assembly
i. Remove the bump stop. If necessary use a
long screwdriver or other implement to
prize the stop free from its mount.
ii. Offer the upper mounting plate assembly
up to the bump stop frame. Slide the two
parts
*
of the assembly apart and into the
frame, as indicated, until they seat snugly
with their M8 holes in alignment.
*
The two parts are shown as
and
in the diagram of Section 4
Summary of Contents for L.312.C.M
Page 17: ......
