DUNIWAY Stockroom T-752A-F110, Instruction Manual

Page: 16 / 59

EMAIL: info@duniway.com FAX: (650) 965•0764
TOLL-FREE [US/CA]: (800) 446•8811 TELEPHONE:
(650) 969•8811
48501 Milmont Drive • Fremont, CA 94538
DUNIWAY STOCKROOM CORP.
Page 7
PIN Function Output Description
1 CHANNEL 1 SET POINT relay Common See "Set Point Operation"
2 CHANNEL 1 SET POINT relay Normally closed (NC) See
"Set Point Operation"
3 CHANNEL 1 SET POINT status +5 V See NOTE 1
4 CHANNEL 2 SET POINT relay Common See
"Set Point Operation"
5 CHANNEL 2 SET POINT relay Normally closed (NC) See "Set Point Operation"
8 CHANNEL 2 current monitor See
"Analog Output"
9 CHANNEL 2 HV monitor See "Analog Output"
10 CHANNEL 2 TTL input See
"Mode of Operation"
11 CHANNEL 1 (-) HV status +12 V See NOTE 2
12 Voltage output +5 V See
NOTE 3
13 CHANNEL 1 TTL input See "Mode of Operation"
14 CHANNEL 1 SET POINT relay Normally open (NO) See
"Set Point Operation"
15 Earth ground
16 Digital ground
17 CHANNEL 2 SET POINT relay Normally open (NO) See "Set Point Operation"
18 CHANNEL 2 SET POINT status +5 V See
NOTE 4
21 CHANNEL 2 (-) HV status +12 V See NOTE 5
22 CHANNEL 2 (+) HV status +12 V See
NOTE 6
23 CHANNEL 1 current monitor See "Analog Output"
24 CHANNEL 1 HV monitor See
"Analog Output"
25 CHANNEL 1 (+) HV status +12 V See NOTE 7
NOTES
1. PIN 3 : Nominal output available when CHANNEL 1 relay is active
2. PIN 11 : Nominal output available when CHANNEL 1 voltage operation is
enabled and output polarity is negative
3.
PIN 12
: Same as PIN 7 on the MISC I/O port
4. PIN 18 : Same as PIN 3, but for CHANNEL 2
5. PIN 21 : Same as PIN 11, but for CHANNEL 2
6. PIN 22 : Same as PIN 25, but for CHANNEL 2
7. PIN 25 : Nominal output available when CHANNEL 1 voltage operation is
enabled and output polarity is positive
8. PIN 6-7, 19-20 : Not available
Table 2. AUXILIARY I/O pin assignment