Cross slot screwdriver
Hammer
Tape measure
Tools required
The use of power tools to assemble the product is not recommended due to the risk of
over tightening fixings
Front edge
Note:
Insert metal
dowels as far as shown.
Fittings
Euro screws x 16
Soft close runner x 4 pair
Handle x 4
Important information
The finished surface of the drawer fronts are hi-gloss, take care when cleaning, wiping and
handling these panels. There is also a protective film covering the drawer front and edges,
this should be removed before the handles are attached (step 17).
Before you start
Check the pack and make sure you have all the parts listed above. If not, contact the
helpline on 08451 656565 who will be able to help you.
When you are ready and sure that you have the right tools to hand, you will need plenty
of space and a clean dry area for assembly.
Ready?
Follow this step-by-step guide
3
B
B
B
1
1
B
B
B
15mm
Metal cam x 10
A
Cam pin x 18
B
30mm
Wooden dowel x 10
C
Panel pins x 30
G
E
Handle screw x 8
J
I
12mm
Metal cam x 8
D
Drawer peg x 16
F
K
Drawer wedge x 16
H
All manuals and user guides at all-guides.com
