blinks rapidly.
You can select the program number you want to edit by pressing the 'UP' or 'DOWN'. The device records up 9
programs (1-9), each containing 50 scenes (1 to 50).
The display of "SCENES" indicates the last scene ("00" means that no scene has been recorded for this program.)
When you select the program you can choose the projector which wants to attribute the scene (from 1-9). Press button
“B”. The display of "PROJ." will indicate a blinking dot. Then select the number with the buttons "UP" or "DOWN."
When the projector is selected, you can adjust the values of the different sliders to program the scene which you want
to record.
When the scene finishes, click on "INSERT" button, the scene is recorded. The display “SCENES” increases to “01”.
If you want to edit a recorded scene, select the programming mode. Press the "INSERT" button to activate the
selection and select a scene you want to replace with the buttons "UP" and "Down." Then press "INSERT" button
again to add this new scene. Delete the old selected one by pressing the button of “DELETE” twice.
Press the "A" button for 3 seconds to exit programming mode.
6.2.4 - Complete erasure of a program
To delete an entire program (all the scenes in it), select the programming mode (press 3 seconds on the button "A").
Then select the program with the buttons "UP" or "DOWN".
Then press the "DELETE", the message “AL” will blink in "SCENES".
Click again on "DELETE" to delete all scenes.
