Dundalk LeisureCraft Cedar Indoor Cabin Sauna
Assembly Instructions
Fig. 6.3
Ceiling supports on top wall board assemblies
7.
Heater Installation
:
This next step requires qualified electrician to install the wiring according to the manufacturer’s
instructions. You must ensure that the manufacturer’s suggested recommended distances from the
floorboards (10½”),
walls and guards (2”) are met. Installing the heater can be done later, but if you wait until the roof is
installed you’ll be working in the dark.
Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisurecraft.com
Fig. 6.4:
Installing washer and nut. (4 corners)
Fig. 7.1
Fig. 7.2
