INSTRUCTION MANUAL
9
OPERATING YOUR REFRIGERATOR
It is recommended that you installed the refrigerator in a place where the
ambient temperature is between 10-
26 °C(50-80 °F) .If the ambient temperature
is above or below recommended temperatures, the performance of the unit may
be affected. For example, placing in extreme cold or hot conditions may cause
interior temperature to fluctuate. The range of set temperature (see Technical
data) may not be reached.
The temperature may fluctuate depending on whether or not the interior light is
on or off or whether the bottles are located on the upper, middle or lower section.
HOW TO USE THE PRESS-BUTTONS ON THE DISPLAY PANEL:
You can set the temperature as your desire by pressing the button.
There are press-buttons on the panel
and
to adjust the temperature by
1 °C.
You can tune the interior light on or off
by pressing the “Light” button.
CARE AND MAINTENANCE
CLEANING YOUR REFRIGERATOR
Unplug the refrigerator and remove the bottles.
Wash the inside with a warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
Outside of refrigerator should be cleaned with mild detergent and water.
Draw out the water box at the bottom, and wash.
Clean the fans by hoover regularly! Dirty fans reduce the cooling performance
and decrease fan lifetime.
MOVING YOUR REFRIGERATOR
Remove all the bottles.
Securely tape down all loose items inside your refrigerator.
Turn the leveling legs up to the base to avoid damage.
Tape the door.
Be sure the refrigerates stays in the upright position during transportation.
