www.factorybuysdirect.com
200366-01B
18
OPERATION
Ignitor Button
Control Knob
Figure 20 - Ignitor Button and Control
Knob Locations
8. Turn control knob counterclockwise
to the ON position. The main burner
should light. Set control knob to the de-
sired heating level.
Note: Please wait one minute after shut
-
ting off heater to allow the control valve
to reset before starting again.
Shutting Off Heater
Turn control knob clockwise
to the
OFF position.
Shutting Off Burner Only
(pilot stays lit)
Turn control knob clockwise
to the
PILOT position.
1. Follow steps 1 through 7 under
Lighting
Instructions
, page 17.
2. With control knob in PILOT position,
strike match, and hold near pilot. Press
in control knob; pilot should light.
3. Keep control knob pressed in for 30 sec-
onds after lighting pilot. After 30 seconds,
release control knob.
4. Make sure the heater screen is in place
before operating heater.
TO TURN OFF GAS TO APPLIANCE
MANUAL LIGHTING PROCEDURE
Figure 21 - Pilot Assembly
Gas Burner
Thermocouple Ignitor
Electrode
CAUTION: Do not try to ad-
just heating levels by using the
equipment shutoff valve.
