Installation & Operating Instructions |
4
Plumbing
1. Run a 3/4” soft water city pressure line to female
garden hose connector on the Hydrominder.
(Fig. 5-A)
Do not turn on the water at this time.
It is recommended that soft
water supply is used if available.
Water supply pressure should not
exceed 60 PSI. Plumber to supply
pressure regulator if required.
2. Run a 3/8” air supply hose from the air regulator
to the air compressor (not supplied) outlet. Fasten
with hose clamps.
(Fig. 5-B)
IMPORTANT
IMPORTANT
IMPORTANT
Figure 5
A
B
Notes
