background image

Specifications | 

2

  

DUFB_A-D Specifications

  

System Features

Model(s) 

 ..........................................................................

DUFB_A-D

Style

 ................................................................................

Air Driven Diaphragm Pump

Pump

 ...............................................................................

FJ5100-040

Capacity

 ..........................................................................

2.5 GPM

Max. Pressure

 ..................................................................

80 PSI

Dimensions

 ......................................................................

Approx. 12” x 28”

Shipping Weight

 ...............................................................

Approx. 40 lbs.

Air Driven Diaphragm Pump
Foamer Modules for each Bay
Stainless Steel Automatic Mixing Tank with Hydrominder Valve
Brass Manifold with Metering Screws
Brush Handle Assemblies with Hoses and Fittings
Aluminum Mounting Plate
Turtle Wax® Foaming Brush Soap (Red)
Stainless Steel Wall Booms
Hogs Hair Brushes
Brush Buckets to Help Keep Brushes Clean
Supply Hoses, Run Tubing & Fittings

Summary of Contents for DUFB_A-D













Reviews: