7
Service Manual for Tri-Channel Cold Pan SUB-GP
PARTS REPLACEMENT
Thermostat Replacement
Figure 4
Location of Thermostat
General
The thermostat is located in front on the control
panel below the refrigeration assembly,
(Figure 4).
1. Disconnect unit from power source.
2. Remove control panel cover with thermostat.
3. Tag and disconnect thermostat wiring.
4. The evaporator coil is located above the
refrigeration assembly. Remove thermostat
probe from evaporator coil.
5. Remove knob.
6. Remove thermostat mounting screws.
7. Remove thermostat from control panel.
8. Install replacement thermostat, mounting
screws and knob.
NOTE:
Do not kink thermostat probe.
9. Install thermostat probe in evaporator coil.
10. Using tags, connect thermostat wiring.
11. Install control panel cover and mounting
screws.
12. Install condenser
13. Connect unit to power source and test
refrigeration assembly.
Evaporator
Figure 5
Location of Evaporator Coil
General
The evaporator coils are embedded in the upper
body, (Figure 5) of the Tri-Channel Cold Pan.
They cannot be serviced or replaced. The entire
upper body must be replaced.
