Page 13 of 25
Duke Manufacturing Co.
2305 N. Broadway • St. Louis, MO 63102
800.735.3853 • 3.231.1130 • 314.231.5074 Fax
www.dukemfg.com
5 - LINKing pans with like product types for 2 & 3-wide timer bar:
Linking pans allows the “Use First” indicators to display properly.
a)
Simultaneously
press the 3 buttons on the right side of the 3-wide Pan Status timer bar (either top or
bottom timer bar) see Figure 1 or 2. Notice the far left light illuminates RED. This indicates you are
programming the PAN 1 links. The other lights indicate GREEN which pans are linked with PAN 1.
b) To link a pan, press a key by an unlit indicator. The light will turn GREEN. To unlink a pan, press a
key by a GREEN lit indicator and the light will go out.
c) To advance to the next pan press the far left UP Arrow once. The other lights indicate in GREEN
which pans are linked.
d) To
EXIT
the link programming mode, simultaneously press the 3 far right buttons and release.
6 - Viewing PANS LINKED for 4-wide timer bar:
a) Stand directly in front of the PHU you desire to view. Simultaneously press rightmost 2 pair of pan
buttons (4 buttons) on the timer bar (skip the Transfer button) and release them all (see Figure 3)
.
Notice that the far left light on the timer bar is RED and that all displays show product NAME. This
indicates you are viewing PAN 1. Other lights indicate in GREEN which pans are linked with PAN 1.
b) To advance to the next pan, press the far left button on the timer bar. The next pan’s light will turn
RED and the other lights indicate in GREEN which pans are linked.
c) To EXIT link viewing, simultaneously press rightmost 2 pair of pan buttons (4 buttons) on the timer bar
(skip the Transfer button), and release them all.
7 - Using Lights to Indicate Time:
In addition to the times shown in the alphanumeric displays, the colors of the lights for the pans not
currently being programmed (i.e. the pans whose light is not FLASHING RED) also indicate the current
time as follows.
•
Each YELLOW light = 20 minutes.
•
Each GREEN light = 5 minutes.
•
Each FLASHING GREEN light = 30 minutes if time is over 120 minutes.
•
Each RED light = 60 minutes.
•
Each FLASHING YELLOW light = 120 minutes.
To determine the time setting, multiply:
•
the number of YELLOW lights by 20
•
the number of GREEN lights by 5
•
the number of FLASHING GREEN lights by 30
•
the number of RED lights by 60 (exclude the FLASHING RED light that indicates the current
pan), and
•
the number of FLASHING YELLOW lights by 120,and add the two numbers together.
For example, 2 YELLOW lights and 1 GREEN light indicate a time of 45 minutes.
Operating Instructions