Duke 59-E3V, Installation And Operation Manual

Page: 27 / 32

27
Installation and Operation of 5/9 Electric Convection Oven
FLUE GUARD INSTALLATION
SECURING DOUBLE STACKED OVENS
1.) On rear of the top oven remove two existing screws
that are located at the lower right hand corner.
2.) On rear of bottom oven remove two existing screws
that are located at the upper right hand corner.
3.) Install stacking bracket using the existing screws
as shown in figure.
4.) Repeat steps to install 2nd stacking bracket on
left hand side.
SIDE MOUNTING SCREWS
P/N 600100
FLUE GUARD KIT
FLUE VENT
1.) Partially back-out the two side mounting screws of
the flue vent.
2.) Slide the keyhole slots of the flue guard over the
partially backed-out screws and then down.
3.) Tighten the two screws.