Dukane ImagePro 8065, User Manual, Page: 94 / 114

92
Command Control via the Network
Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are required.
(

20
)
7) Click [Security Settings] on the main menu.
8) Click [Network Control] and enter the desired authentication password. * See
Note1.
9) Click the [Apply] button to save the settings. * See Note2.
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)] , [Network Control Port2 (Port: 9715)] , and [Image Transfer
Port (Port: 9716)] .
NOTE1
• The new configuration settings are activated after restarting the
network. Restart the network when any configuration settings are changed.
The network connection can be restarted using [Network Restart] on the main
menu.
NOTE2