manualshive.com logo in svg

Dukane ImagePro 8065, User Manual, Page: 75 / 114

Share
Download
Dukane ImagePro 8065 User Manual Download Page 75

73

Settings

Alert Settings (Continued)

Item

Description

Filter Time Alarm

Configures Filter Time Alarm alert settings.

SNMP Trap

Click the 

[Enable]

 check box to enable SNMP Trap alerts for 

this item.

Send Mail 

Click the 

[Enable]

 check box to enable e-mail alerts for this 

item.

Mail Subject

Configures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric 

characters.

Mail Text

Configures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric 

characters.

“CHANGE THE LAMP” is 

displayed

Configures alert settings for when “CHANGE THE LAMP” is 

displayed.

SNMP Trap

Click the 

[Enable]

 check box to enable SNMP Trap alerts for 

this item.

Send Mail 

Click the 

[Enable]

 check box to enable e-mail alerts for this 

item.

Mail Subject

Configures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric 

characters.

Mail Text

Configures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric 

characters.

Cold Start

Configures Cold Start alert settings.

SNMP Trap

Click the 

[Enable]

 check box to enable SNMP Trap alerts for 

this item.

Authentication Failure

Configures Authentication Failure alert settings.

SNMP Trap

Click the 

[Enable]

 check box to enable SNMP Trap alerts for 

this item.

Click the 

[Apply]

 button to save the settings.

Summary of Contents for ImagePro 8065



















































































































Reviews:

No comments