DUKANE AV
18
Chapter 6 Q & A
This chapter describes the problems you might encounter when you use this Digital Visualizer. If you have a problem,
refer to the appropriate section and follow all the suggestions that apply to your problem. If none of the suggested
solutions solves the problem, call your dealer or your service center.
Q1: The system indicator does not come on.
No power is available. Check that the power cord is connected securely at both the power outlet and the
Visualizer.
Q2: No image appears on the screen.
1-Press different signal buttons and then press the selected SOURCE signal button.
2- Make sure all of the cables are installed correctly and securely.
3- Check that the power of the LCD monitor or projector is turned on.
4- Make sure the object is positioned in the shooting area.
Q3: The image or parts of the image are blurred or not in focus.
The lens focusing is possibly not correct because the object is tilted or not in the best position. Press the AF
(Auto Focus) on the remote control.
Q4: Image is too dark or too bright.
Press the <BRT+>
、
<BRT-> on the control panel to adjust the brightness setting.
Q5: Remote Control does not work.
1- Please be sure the remote control is aimed at
the IR sensor on the front edge of the base.
2- Please check the battery in the remote control.
DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles , I
L
60174
800-676-2487 / 630-762-4032
www.dukcorp.com/av
IR Sensor
