Dukane 9100WUSS User Manual Download Page 81

Page: 81 / 81

End User License Agreement for the Projector Software

• Software in the projector consists of the plural number of independent software

modules and there exist our copyright and/or third party copyrights for each of

such software modules.

• Be sure to read “End User License Agreement for the Projector Software” which

is separated document.

Trademark acknowledgment

• VESA and DDC are trademarks of the Video Electronics Standard Association.

• HDMI

, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

• Blu-ray Disc

and Blu-ray

are trademarks of Blu-ray Disc Association.

• DICOM

is the registered trademark of the National Electrical Manufacturers Association

for its standards publications relating to digital communications of medical information.

• HDBaseT

and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

• DLP and Digital Micromirror Device (DMD) are trademarks of Texas Instruments. Others

are copyrights of their respective companies or organizations.

• Crestron

, Crestron e-Control

, e-Control

,Crestron Connected

, Fusion RV

,Crestron

RoomView

and RoomView

are trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and other countries.

• Trademark PJLink is a trademark applied for trademark rights in

Japan, the United States of America and other countries and areas.

All other trademarks are the properties of their respective owners.

Specifications

DUKANE CORP AV SERVICE DEPT
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032
Fax 630-584-5156
[email protected]
www.dukaneav.com

9100WUSS-User-Manual-00

Summary of Contents for 9100WUSS


















































































Search results

Summary of Contents for 9100WUSS

Reviews:

Related manuals for 9100WUSS

Brands by name

Popular brands

Dukane 9100WUSS, User Manual

Search results

Summary of Contents for 9100WUSS

Reviews:

Related manuals for 9100WUSS

Brands by name

Popular brands