OSD description
English-56
Settings 1
Source
This function is same as the hotkey which on Remote controller. You can use remote controller or this
function to select the correct input source.
•
HDMI1
HDMI input from PC or media device.
•
HDMI2
HDMI input from PC or media device.
•
HDMI3 / MHL
Connect to a MHL-compatible device by using an HDMI/MHL cable.
•
VGA
Analog RGB from PC.
•
Composite Video
Video input from traditional composite video.
•
HDBaseT
Uncompressed digital video from HDBaseT device.
Projection
Use these function to install the projection mode. Has below 4 mode can select:
•
Normal
Refer to Page 25 : “Normal” for detailed information.
•
Ceiling
Refer to Page 26 : “Ceiling” for detailed information.
•
Rear
Refer to Page 26 : “Rear” for detailed information.
•
Rear + Ceiling
Refer to Page 26 : “Rear + Ceiling” for detailed information.
