Dukane 8924HW-rj, User Manual

Page: 14 / 102

12
Connecting with your devices (continued)
Setting up
• If you insert a USB storage device, such as a USB memory, into the USB TYPE
A port and select the port as the input source, you can view images stored in the
device (

73)
.
• You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug.
In that case, the built-in speaker outputs the sound from the microphone, even
while the sound from the projector is output. You can input line level signal to the
MIC port from equipment such as wireless microphone. Select HIGH in the MIC
LEVEL item of the AUDIO menu when you input line level audio signal to the
MIC port. In the normal mode, the volume of the microphone can be adjusted
separately from the volume of the projector using the menu. (

43)
In the standby mode, the volume of the microphone is adjustable with the
/- buttons on the remote control, in synchronization with the volume
of the projector. (

18)
Even when the sound of projector is set to mute mode by the AUDIO SOURCE
function (

42)
, the volume of the microphone is adjustable.
In both modes, the MUTE button on the remote control works on the sounds of
the microphone and the projector. (

18)
• If a loud feedback noise is produced from the speaker, move the
microphone away from the speaker.
• This projector doesn't support plug-in power for the microphone.
NOTE
(continued on next page)
USB storage
device
►Before removing the USB storage device from the port of the
projector, be sure to use the REMOVE USB function on the thumbnail screen to
secure your data (

76)
.
CAUTION
Microphone system
Speakers
(with an amplifier)
Monitor
MIC
HDMI
USB
TYPE B
USB
TYPE A
DC5V 0.5A
LAN
COMPUTER IN1
COMPUTER
IN2
VIDEO
S-VIDEO CONTROL
MONITOR OUT
AUDIO
OUT
IN3
IN1
IN2
L
R
L
R Y
Cb/Pb
Cr/Pr
R L
RGB IN