Dukane 8789H General User Manual Download

Page: 15 / 72

Power on/off

Make sure that the power cord is firmly and

correctly connected to the projector and the

outlet.

Turning on the power

Make sure that the

POWER

indicator is

steady orange (



). Then remove the lens

cover.

Press

STANDBY/ON

button on the

projector or the remote control.

The projection lamp will light up and

POWER

indicator will begin blinking in green. When the power

is completely on, the indicator will stop blinking and light in steady green

(



Power on/off

To display the picture, select an input signal according to the section “Selecting an

input signal” (



►A strong light is emitted when the projector’s power is on. Do

not look into the lens of the projector or look inside of the projector through any

of the projector’s openings.

►Do not touch around the lamp cover and the exhaust vents during use or just

after use, since it is too hot.

WARNING

Press the

STANDBY/ON

button on the projector or the remote control. The

message “Power off?” will appear on the screen for about 5 seconds.

Turning off the power

Press the

STANDBY/ON

button again while the message appears.

The projector lamp will go off, and the

POWER

indicator will begin blinking in

orange. Then

POWER

indicator will stop blinking and light in steady orange

when the lamp cooling is complete (



Attach the lens cover, after the

POWER

indicator turns in steady orange.

STANDBY/ON

button

POWER

indicator

• Turn the power on/off in right order. Please power on the projector

prior to the connected devices.

• This projector has the function that can make the projector automatically turn on/

off. Please refer to the

DIRECT POWER ON

(



)

and

AUTO POWER OFF

(



)

items of the OPTION menu.

NOTE

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

SEARCH BLANK

MUTE

MY BUTTON

POSITION

ESC

ENTER

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

VOLUME

DOWN

ー

OFF

＋

FREEZE

Do not turn the projector on for about 10 minutes or more after turning it off. Also,

do not turn the projector off shortly after turning it on. Such operations might cause

the lamp to malfunction or shorten the lifetime of some parts including the lamp.

Summary of Contents for 8789H









































































Search results

Summary of Contents for 8789H

Reviews:

Related manuals for 8789H

Brands by name

Popular brands

Dukane 8789H, General User Manual

Search results

Summary of Contents for 8789H

Reviews:

Related manuals for 8789H

Brands by name

Popular brands