Dukane 8112 User Manual Download | Manualshive

Page: 1 / 79

background image

1

Projector

8112

U

ser's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read all manuals for this

product. Be sure to read “

Safety Guide

” ﬁrst. After reading them, store them in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are
described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.

Please refer to the pages written following this symbol.

• Mac

®

is a registered trademark of Apple Inc.

• Windows

®

is a registered trademark of Microsoft Corporation in the U.S. and/or

other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.
• HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC in the United States and other
countries.

• DVI is a trademark of Digital Display Working Group.
• Trademark PJLink is a trademark applied for trademark rights

in Japan, the United States of America and other countries and
areas.

• Blu-ray Disc

TM

and Blu-ray

TM

are trademarks of Blu-ray Disc Association.

All other trademarks are the properties of their respective owners.

NOTICE

This entry notices of fear of causing trouble.

1
2
3
...
»

Summary of Contents for 8112
















































































Reviews:

No comments

Related manuals for 8112

Brand: InFocus Pages: 3

Stage Zoom 1200

Brand: Clay Paky Pages: 6

TITAN WUXGA 3D-L • TITAN WUXGA 3D-P

Brand: Digital Projection Pages: 2

Yard Master Pro 2 Series

Brand: Elite ProAV Pages: 5

Brand: Christie Pages: 58

DataPro-TAE/NFN-aP

Brand: Nivus Pages: 2

Brand: Tripp Lite Pages: 3

Brand: Harman Pages: 139

Brand: HQ Power Pages: 13

Brand: Hitachi Pages: 34

Brand: Hitachi Pages: 2

Brand: Hitachi Pages: 39

Brand: Hitachi Pages: 60

Brand: Hitachi Pages: 32

Brand: Hitachi Pages: 72

Brand: Hitachi Pages: 3

Brand: Panasonic Pages: 28

Brand: RocketFish Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands