Dukane 8111H Page 20 User Manual Download

Page: 20 / 53

3. Network Functions

3.1 Configuring and controlling the projector via a web browser (continued)

3.1.6 Alert Settings

Displays and configures failure & alert settings.

Alert Item

Description

Cover Error

The lamp cover has not been properly fixed.

Fan Error

The cooling fan is not operating.

Lamp Error

The lamp does not light, and there is a possibility that interior

portion has become heated.

Temp Error

There is a possibility that the interior portion has become

heated.

Air Flow Error

The internal temperature is rising.

Cold Error

There is a possibility that the interior portion has become

overcooled.

Filter Error

Filter time over.

Other Error

Other error.

If displaying this error, please contact your dealer.

Schedule Execution

Error

Schedule Execution error. (



)

Lamp Time Alarm

Lamp time over Alarm Time setting.

Filter Time Alarm

Filter time over Alarm Time setting.

Transition Detector

Alarm

Transition Detector Alarm. (



OPTION menu in the User’s

Manual – Operating Guide

)

Cold Start

• If STANDBY MODE is set to NORMAL, the projector's power

status changes from off to standby state.

• If STANDBY MODE is set to SAVING, the projector's power

status changes from standby state to on (the lamp is turned on).

(



SETUP menu in the User’s Manual – Operating Guide

)

Authentication Failure

The SNMP access is detected from the invalid SNMP

community.

Refer to



“Troubleshooting” in the User’s Manual – Operating Guide

for further

detailed explanation of Error except Other Error and Schedule Execution Error.

Summary of Contents for 8111H






















































Search results

Summary of Contents for 8111H

Reviews:

Related manuals for 8111H

Brands by name

Popular brands

Dukane 8111H, User Manual

Search results

Summary of Contents for 8111H

Reviews:

Related manuals for 8111H

Brands by name

Popular brands