background image

14

Remote control

Remote control

Putting batteries

WARNING

  ►Always handle the batteries with care and use them only as 

directed. Improper use may result in battery explosion, cracking or leakage, 

which could result in fire, injury and/or pollution of the surrounding environment.

• Be sure to use only the batteries specified. Do not use batteries of different 

types at the same time. Do not mix a new battery with used one. 

• Make sure the plus and minus terminals are correctly aligned when loading a 

battery.

• Keep a battery away from children and pets.

• Do not recharge, short circuit, solder or disassemble a battery.

• Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry 

play. 

• If you observe a leakage of a battery, wipe out the flower and then replace 

a battery. If the flower adheres your body or clothes, rinse well with water 

immediately.

1. 

Remove the battery cover.  

Slide back and remove the battery cover in the direction of the arrow.

2. 

I

nsert the batteries. 

 Align and insert the two AA batteries according to their plus and minus   

terminals as indicated in the remote control.

3. 

Close the battery cover. 

 Replace the battery cover in the direction of the arrow and snap it back into 

place.

Summary of Contents for 8063C
















































































Reviews: