NEC Display Solutions of America, Inc.
PX1005QL Installation Guide
Desktop and Ceiling Mount
Rev 1.0
www.necdisplay.com
PX1005QL
Page 12 of 12
PC Control Codes
Function
Code Data
POWER ON
02H
00H
00H 00H 00H 02H
POWER OFF
02H 01H 00H 00H 00H 03H
INPUT SELECT COMPUTER
02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT HDMI 1
02H 03H 00H 00H 02H 01H A1H A9H
INPUT SELECT HDMI 2
02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT DisplayPort 1
02H 03H 00H 00H 02H 01H A6H AEH
INPUT SELECT DisplayPort 2
02H 03H 00H 00H 02H 01H A6H AEH
INPUT SELECT HDBaseT
02H 03H 00H 00H 02H 01H 20H 28H
INPUT SELECT SLOT
02H 03H 00H 00H 02H 01H ABH B3H
INPUT 3G SDI
02H 03H 00H 00H 02H 01H ABH B3H
PICTURE MUTE ON
02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF
02H 11H 00H 00H 00H 13H
Cable Connection
Communication Protocol:
Baud Rate:
38400 bps (for cable lengths longer than 20’, it is recommended changing to 9600 bps in setup menu)
Data Length: 8 bits
Parity: No Parity
Stop Bit: One bit
X on/off: None
Communications: Full duplex
PC Control Connector (D-Sub 9P)
Note 1 : Pins 1, 4, 6, and 9 are used inside the projector.
Note 2: For long cable runs it is recommended to set communication speed within the projector to 9600 bps.
Note 3:
Jumper “Request to Send” and “Clear to Send” together on both e
nds of the cable to simplify cable connection.
68100-4KSS Installation Guide
Desktop
and
Ceiling
Mount
Rev 1.0
Dukane AV Division
www.dukaneav.com 68100-4KSS_Installation _Guide-00 Page 12 of 12
