16
2. Projecting an Image (Basic Operation)
Upon connecting the power cable, the POWER indicator of the projector will
light
in
green
. If there are no input
signals, the device will go into the standby
state
.
(In the state,
standby mode is
NORMAL
.)
(
→
)
COMPUTER IN
Make sure that the prongs are fully inserted into
both the AC IN and the wall outlet.
To wall outlet
Computer cable (with ferrite core)
(sold commercially)
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the
AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
