Dufour Yachts DUFOUR 34, Owner'S Manual

Page: 9 / 73

ENGLISH 15-02-03 Page 9
DUFOUR 34
3.5 220/110 Volt installation
DANGER
The on-board 220 or 110 V installation is protected by a circuit breaker and fitted with a
residual current device. The wiring of additional 220 or 110 V on-board accessories
must be carried out by professionals, with uprating of the master circuit-breaker if
necessary.
DANGER
Your boat is not supplied with a shore/boat supply cable or a male plug for the shore
outlet. The cable must be suitable for outdoor use. Its cross-sectional area must be
adjusted according to its length and the rating of the main circuit-breaker (see
electrical diagram). The plug must be suitable for the female socket on the shore (if
necessary, seek the advice of a professional)It should be as near as possible to the
IP
67 / IEC529 type
- Switch off the shore supply at the on-board isolator before connecting or
disconnecting the shore/boat supply cable.
- Connect the shore/boat supply cable at the boat end before connecting it to
the shore outlet
- Disconnect the shore/boat supply cable at the shore outlet before
disconnecting it at the boat end
- Close the shore outlet cover properly