Duevi EzyDriveCAM, Hardware Installation Manual

Page: 4 / 14

4
Figure 2 – Electronic board of EzyMegaCAM
POF
(connector side)
POWER SUPPLY
The camera can be powered:
power supply 12 ÷ 30 V or power supply 24 V
The POWER connector does not have preferential polarity (even in case of CC)
POWER
BAT
Backup battery
connector
POF1 LED
Network activity
MASTER slot
Lower slot
Use ONLY this one
in case of single SD
card
SLAVE slot
Upper slot
DO NOT use in case
of single SD card
Double SD slot
To install up to
two SD cards
(must be
identical).
Insert/remove
only with device
completely
unpowered
Input/Output
Use provided cable
POF1
Plastic optic fiber
connector (LAN)
POF2
Plastic optic fiber
connector (LAN)
POF2 LED
Network activity