- B 29 -
Short Seam Automat 2211-5 Working Instructions
Beisler Automated Sewing Equipment
Fig. 22/23
Fig. 22
Fig. 23
Fig. 23:
Display during seam number selection:
1
Active seam number
2
Passive seam number
3
Seam number is selected
B.3
Operation
B.3.3 Selecting the sewing program
After the machine has been turned on and the control pro-
gram has been activated, the sewing program that had
been selected last is set.
Sewing programs are stored in the memory (
M
) where up
to 50 sewing programs (
M 01 -
M 50
) can be pro-
grammed.
To each sewing program, up to six seam numbers (01, 02,
03, 04, 05, 06) are assigned.
Fig. 22:
The program control of the machine is program-
med at the factory with a sewing program
1
with three
different seams
2
.
The name of the sewing program is
M 01,
the seams are
marked by the seam numbers (
01, 02, 03
):
•
Seam
01
is used for clipping and crimping over the left
slash selvage and for sewing the left slash selvage to
the left trousers component.
•
Seam
02
is used for sewing the right slash selvage to
the right trouser component.
•
Seam
03
is a test seam that is restricted to two func-
tions:
• Clamp movement from the insertion station to the
sewing head,
• Starting/ending the complete sewing process.
The test seam is used for checking the clamp trans-
port and the sewing process when the machine is set
up.
1. Select sewing program at operating panel.
Request memory:
•
Press
key.
Select sewing program number, e.g. 01:
•
Press
and
keys.
The selected program is activated immediately.
2. Select seam number of desired seam.
Move cursor to seam number:
•
Press
.
or
Y
key.
Confirm selection:
•
Press
$
key.
