TECHNICAL ASSISTANCE AND SPARE PARTS
Before leaving the factory, this equipment was tested and adjusted by skilled personnel so as to
guarantee the best operating results.
Original spare parts can only be found at our technical service centres and authorized stores. Every repair
or adjustment necessary thereafter must be carried out with the greatest care by qualified personnel.
For this reason we recommend you always contact the dealer you purchased it from or our nearest
service centre stating the make, model, series and type of problem experienced with the equipment. The
relevant specifications are stamped on the information label attached on the underside of the appliance
and on the label attached to the packing box. This information will allow the technician to procure the
appropriate spare parts and guarantee that the right action is taken promptly. It is recommended that you
note these specifications below so that they are readily available at all times.
MARK: ........................................................
MODEL: .................................................…
SERIES: ....................................................
This appliance is marked according to the European directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE).
This guideline is the frame of a European-wide validity of return and recycling on
Waste Electrical and Electronic Equipment.
12
TECHNICAL SPECIFICATIONS
FRYER
Voltage
220 - 240 V ~
Frequency
50/60 Hz
Total nominal power
2300 W