rigging scheme
45
Note:
Distances given below are to be understood as
distances between connection points. When cutting a line for
repair,
20 cm extra must be added
, as at each end a 10 cm
stitch is required to fix the loop. The only exception is the main
steering line (BRP), which is looped only at the upper end, with
at least 150 mm margin for fastening brake handle (this means
for this line extra 25 cm than in the table is needed).
i
The rigging scheme itself is published on the next page, while tables of line lengths you
will find in attachments to this manual.
Lengths are measured with a specialised, computer-operated device. All the lines before
measurement are stretched with a steady 5 kg load. Thanks to abovementioned device
and proper procedures, final tolerance of line lengths does not exceed +/- 10mm.
Summary of Contents for Universal 1.1 23
Page 1: ...user manual V 07 07 2018 BASIC risers ...
Page 46: ...46 rigging scheme ...
